TL;DR — Direct answer: A nonwoven and hygiene products factory needs clean, dry, oil-free air at 6 to 7 bar for spunbond and meltblown, air-laid forming, diaper converting, wipe folding and packaging, with a pressure dew point of 3 degrees C and filtration to 0.01 micron, meeting ISO 8573-1 Class 1 or 2 for oil, so no oil or moisture reaches a diaper, a wipe or a web. Size on the coincident peak of converting lines, 10 to 20 cubic metres per minute for a mid-size plant, roughly a 75 to 160 kW screw compressor with a variable speed drive. QiAir, a Chinese screw compressor manufacturer and supplier, builds oil-free machines for hygiene factories.
A diaper, a wet wipe or a sanitary pad is a hygiene product, and the air that touches it must be as clean as the product itself. Nonwoven webs are formed by spunbond, meltblown or air-laid lines, and then high-speed converting lines cut, fold, glue and pack them at hundreds of pieces a minute. Compressed air drives the web handling, the cutting and folding stations, the glue applicators, the packaging machines and the reject ejection jets, and on an air-laid line the forming air is part of the web itself. A trace of oil on a diaper core is a hygiene failure, moisture in a wipe pack changes the product, and a pressure dip at the converting line stops a machine that produces hundreds of pieces a minute. The air system is part of the hygiene quality, not just a utility. QiAir is a Chinese manufacturer and supplier of screw air compressors, and its machines for hygiene products plants are specified around oil-free air first and flow second.

The mistake buyers make most often is treating a hygiene products plant like a general packaging plant and buying a filtered oil-injected compressor. The converting lines run at very high speed, the air contacts the product directly, and the hygiene standard means the oil risk must be removed at source, not filtered out and hoped for. Add the converting lines, the web forming and the packaging machines together at peak and the real demand is typically 20 to 30 percent higher than the first estimate. This guide maps where the air goes in a nonwoven and hygiene products factory, explains how to size for high-speed converting lines, sets the oil-free standard that protects hygiene products, and shows what to put on a sizing sheet for a China supplier.
Where Air Is Used: Web Forming, Converting Lines and Packaging
Web forming is the first user. Spunbond and meltblown lines use air for filament drawing, web laydown and bonding, and air-laid lines use air to form the web from fibres and superabsorbent polymer, so the forming air is part of the product itself. A web forming line draws a steady, continuous flow, and any oil or moisture in that air ends up in the web. Keep the forming air on a dedicated, oil-free branch with its own filtration, and never feed it from a general shop line that also serves air tools.
Converting lines and packaging take the most air and run at the highest speed. Diaper converting lines use it for cutting, folding, elastic application, glue nozzles, transfer drums and reject ejection, wet wipe lines use it for folding, stacking, liquid dosing control and pack sealing, and packaging machines use it for bagging, case packing and palletising. A single diaper line running at 600 to 800 pieces a minute can draw 2 to 4 cubic metres per minute on its own, and a plant with three to six lines sees those flows add up fast. Superabsorbent polymer dust is fine and everywhere, so air tools and valves in the converting hall need filtration that survives it, and any open blow-off nozzle wastes air fast.
- Web forming: spunbond, meltblown and air-laid forming air that becomes part of the nonwoven web.
- Converting lines: cutting, folding, elastic application, glue nozzles and reject ejection at 600 to 800 pieces a minute.
- Packaging: wet wipe folding and stacking, liquid dosing control, bagging, case packing and palletising.
Sizing for High-Speed Converting Lines
List every line with its flow at peak and at steady running, because the two differ in hygiene work. A mid-size plant with three to six diaper or wipe converting lines, one or two web forming lines and a packaging area typically peaks at 10 to 20 cubic metres per minute at 6 to 7 bar, which is roughly a 75 to 160 kW screw compressor, and the peak usually lands when all converting lines run at full speed together. A variable speed drive earns its keep here: it follows the speed changes of the converting lines instead of loading and unloading a fixed-speed machine all day, and it holds pressure within the narrow band that cutting and folding stations prefer.
Keep the pressure drop to the farthest converting line under 0.3 bar at peak flow, and fit a receiver of 1000 to 2000 litres to absorb cutting and ejection spikes. A ring main helps when the web forming hall and the converting hall sit in different parts of the building. Log pressure at the farthest converting line during a full production run for a week, because that log is the honest record of whether the compressor is big enough, and it settles arguments faster than any catalogue figure. Never raise the set point to mask a sag: every extra bar adds roughly 7 percent to power use and hides the real fault, which is usually a clogged filter or an undersized pipe.
- Size on the coincident peak of all converting lines at full speed, not on steady-state average flow.
- Use a variable speed drive for converting-line loads, and keep far-end pressure drop under 0.3 bar.
- Log farthest-converting-line pressure during production for a week to prove the sizing in real use.
Oil-Free Class 0 Air: ISO 8573-1 and Hygiene Product Safety
Hygiene products demand the strictest air standard in this series. The air that contacts a diaper core, a wet wipe or a nonwoven web must be oil-free, and the honest way to guarantee that is an oil-free screw compressor, which produces air with no oil in the compression chamber at all. The target is ISO 8573-1 Class 1 or 2 for oil, Class 2 or better for particles and a 3 degree C pressure dew point, with a pre-filter, a refrigerated dryer, a coalescing filter to 0.01 micron and an activated-carbon filter in series, and a final point-of-use filter at each converting line. A filtered oil-injected machine can meet the numbers on paper, but a single filter failure puts oil on the product, and in a hygiene plant that risk is not acceptable.
Superabsorbent polymer dust needs its own discipline. Keep the compressor intake away from the converting hall so the machine does not breathe polymer dust, fit a heavy-duty intake pre-filter, and check it weekly in the first months. Drain condensate with automatic zero-loss drains, slope lines to drain legs, and test the air at the farthest converting line quarterly for oil, moisture and particles, with the results kept on file for customer audits. Change coalescing elements on pressure drop, not on a calendar guess, and keep a spare set of elements on the shelf, because a converting line that stops for an air fault loses hundreds of pieces a minute.
- Use an oil-free screw compressor for hygiene products, targeting ISO 8573-1 Class 1 or 2 for oil.
- Fit pre-filter, refrigerated dryer, 0.01 micron coalescing filter and carbon filter, with a final filter at each converting line.
- Keep the compressor intake away from polymer dust, and test converting-line air quarterly with results kept for audits.
Buying from China: Sizing Sheet for a Hygiene Products Plant Compressor
QiAir is a Chinese manufacturer and supplier of screw air compressors, and a hygiene products order should start with a sizing sheet that names the converting lines. Send the supplier the number of converting lines and web forming lines, the line speeds in pieces per minute, the coincident peak at 6 to 7 bar, the ISO 8573-1 class the product requires, ambient temperature and humidity, and the distance to the farthest converting line. Ask for a quotation that states the oil-free design, dryer type and filtration grades explicitly, and ask for the oil content in writing, with the test method named.
Agree the acceptance test before shipment: a full-load run at rated pressure, a dew point reading at the dryer outlet, and an oil-aerosol check at the final filter outlet against the agreed ISO 8573-1 class. On arrival, install on a level plinth with clear cooler airflow, connect drains before the first run, and survey pressure at the farthest converting line during the first full production week. Keep a log of pressure, dew point and filter changes, and review it monthly, because a slow rise in dew point is the earliest sign that a dryer needs attention before hygiene products start failing customer audits.
- Send the supplier converting and forming line counts, line speeds, coincident peak and farthest-line distance.
- Ask for the oil-free design, dryer type and filtration grades in writing, with the oil content and test method named.
- Accept on a full-load test plus dew point and oil-aerosol checks against the agreed ISO 8573-1 class, then survey pressure in week one.
Frequently asked questions
What pressure does a hygiene products factory need?
A nonwoven and hygiene products factory needs clean, dry, oil-free air at 6 to 7 bar for web forming, diaper converting, wet wipe folding and packaging. Keep far-end pressure drop under 0.3 bar, because a pressure dip at the converting line stops a machine producing hundreds of pieces a minute, and size on the coincident peak of all converting lines at full speed.
Why must hygiene products air be oil-free?
The air contacts a diaper core, a wet wipe or a nonwoven web directly, so a trace of oil is a hygiene failure. The target is ISO 8573-1 Class 1 or 2 for oil, and the honest way to guarantee it is an oil-free screw compressor, which has no oil in the compression chamber at all, with a 0.01 micron coalescing filter and carbon filter in series.
What size screw compressor does a hygiene products factory need?
A mid-size plant with three to six diaper or wipe converting lines, one or two web forming lines and a packaging area typically needs 10 to 20 cubic metres per minute at 6 to 7 bar, roughly a 75 to 160 kW screw compressor with a variable speed drive. A single diaper line at 600 to 800 pieces a minute can draw 2 to 4 cubic metres per minute on its own.
Related reading
- Single-Stage vs Two-Stage Screw Compressors: Which One a China Manufacturer Recommends
- Buying Screw Compressors from China: A Ranking Checklist for Choosing a Supplier
QiAir is a Chinese manufacturer and supplier of screw air compressors. If you are sourcing a screw compressor from China — for a factory, a food plant, a construction site or a new production line — contact QiAir for a sized quotation, documented performance data and export support.



