Wind the distinction of machine of pneumatics of cold, water-cooling and advantage

1. what is wind machine of pneumatics of cold, water-cooling

Machine of wind cold pneumatics is from outdoor introduce cold air, use fan and wing piece condenser comes loose hot, will achieve the result that lube refrigeration and machine drop in temperature through air, water-cooling pneumatics machine is a basis helix copper pipe (go oily outside copper pipe, inside be on fire) begin heat to hand in with water achieve cooling result.

Cold, water-cooling nods 2. wind jointly

The machine runs parameter to agree, all suit long-term and successive movement.

Distinction of cold, water-cooling is in 3. wind

4. wind cold consideration is ventilated

Need to consider dimensional issue when installation, circulate to avoid sirocco, need to go out for nothing bigger medicinal powder hot space (big) of compressor installation space, still need to add outfit wind scooper when necessary.

Wind is cold care and maintenance is simple, but suffer environmental effect, be in ventilated owe beautiful or be the manufacturing operating mode with big dust, need to remove dust regularly sweep, criterion its come loose hot surface suffers dirt easily to enclothe, cause medicinal powder hot system jams, affect cooling result, cause equipment high temperature even.

Aircraft of large indoor wind cold pneumatics, radiator manufacturer sets beforehand maintain cycle maintains normally can, in the meantime, wind cold machine can add outfit wind scooper to make be commutatived with the air outdoor coming loose heat up commonly, achieve with this drop in temperature ventilated effect.

Machine of 5. water-cooling pneumatics considers water quality

The cooling water of water-cooling pneumatics machine has certain clean effect, accordingly its are when flow of pneumatics machine interior, can have clean effect to equipment interior, conduce to those who lengthen equipment maintaining clean cycle, opposite wind is cold drop in temperature faster, efficiency is taller.

Water-cooling station room became much a cooling water tower or cold water source, need regular examination, colder than wind chance became much overhaul a process together.

Water-cooling pneumatics machine must use cleaner industrial cooling water, the temperature that drink water under 32 ℃ , written guarantee dirty jams in order to avoid cooler, general 1500 hours clear condenser water side.

If why 6. wind cold water-cooling chooses

Water-cooling machine is more powerful to climate change adaptability, different and hydraulic the change that can get used to air temperature; The manufacturing operating mode of much dirt, if the industry water-cooling engine such as spin, spray, cement is more dependable; Cold machine of wind of signal to noise ratio of water-cooling machine a confusion of voices is relatively inferior, can satisfy larger treating capacity; Ventilated condition is good, have installation pneumatics machine to choose wind cold opportunity is more equal.